Park Bench assembly

Step 3: The next step is to screw on the gussets. The gussets are flushed to the back of the bench assembly. It is very important to have no gaps between the bench and the gusset as well as between the leg frame and the gusset. The Gussets are square and when installed properly they square the frame to the back seat.

Step 4: Now lay the bench down on it's back. Line up the top backrest piece(the one with the clipped corners) with the upper set of lines marked out on the leg frames. Screw it on. Line up the lower backrest board and screw it on the same way. And that's all there is to it.